3 Ways to edge artificial grass

When installing artificial grass, you need to create an edging around the perimeter of the area for the grass to be attached to. There are various ways we see people do this, but here are the best 3. Along with when you may use each type of edging.

 

Classic Edging

 

With classic edging, you can use either a composite or timber edging. Timber is cheaper, and is recommended for straight edges. Whereas composite is more expensive, but perfect if there is a curve in the area as it has a lot of give to it.

 

Timber edging is always what we would look at first. It is a cheaper way to edge the area, along with being durable and long lasting. Using a timber edge is also simple to install. All you need to do is put wooden stakes into the ground and drill the timber to it.

 

We would always recommend using timer. We like to keep it simple and effective, that’s what you get using timber. The only downside to using a timber edge, is if you have a substantial curve, the timber won't be able to conform with the shape. That where composite comes in.

 

Composite edging is a more flexible material to use when edging a lawn. This is ideal if you have a curve. We would still always use timber for straight edges, and if there is a curve elsewhere in the garden, we would use composite instead.

 

Concrete

 

Concrete edging is always our second choice for outdoor installs after the classic edging we mention above. We would use concrete to create a perimeter around the area along with setting red plugs in for the screws. To create this, make a 4 inch wide concrete rail around the perimeter and place the plugs every 10cm or so. This is to attach the grass later.

 

The reason we would use concrete if it is going to a paving or fence that has concrete in the way, you won't be able to get a steak in. Because of this, you can build up the concrete to create an edging for your artificial grass.

 

Rubber Edging

 

Rubber edging isn't something that you would use on an everyday garden install. Rubber edging is typically used when edging around artificial grass laid over a hard, flat surface like concrete, tarmac or indoor floors. If you have any of these installs for artificial grass, rubber edging is perfect for it.

 

An exhibition or event

An indoor area

A show room

 

All of these may require temporary or semi-permanent installs. The edge of normal artificial grass may lift or curl up. So installing a rubber edging will not only give it a neat seamless seal, it will also keep the edge of the grass laid flat. Having a lifted edge may also be a trip hazard, so having the sloped rubber edge will help to eliminate potential trips.